Pro Lite Technology

Manual Rotary Stages

The DT series of rotary stages provide precision, manual rotational adjustment over 360°. With an optional motor drive, these become the DTM series (see the motorised positioning section). The DV rotary adjustment stages trade a slightly lower precision for a reduced cost.

» Request 3D PDF or 3D CAD model for the item(s) of interest.


OWIS DT 40 Rotary Stage

DT 40 Rotary Stage

The DT 40 rotary stage provides an unlimited rotational azimuth and a resolution of ~ 0.01°. The DT 40 is designed for use with the SYS 40 rail system. The DT 40 is also available as the DMT 40 with motor drive (DC servo or 2-phase step motor). It has an aperture of 20mm diameter and a retainer of 25mm diameter. 

» Download Datasheet


OWIS DT 65 Rotary Stage 

DT 65 Rotary Stage

This DT 65 rotary stage provides unlimited angle of rotation at resolutions of less than one arcmin. It is suitable for use in both horizontal and vertical rotational planes. The DT 65 is compatible with the SYS 65 rail system and is also available with motor drive. It is available with a 25mm diameter retainer and aperture or a retainer of 35mm with an aperture of 30mm.

» Download Datasheet


OWIS DT 100 Rotary Stage 

DT 100 Rotary Stage

The DT 100 rotary stage has a preloaded worm gear drive with a gear ratio of 180:1. Despite its compact dimensions, it can handle large loads in both axial and radial directions. The DT 100 has a large aperture of 53mm and is available with motor drive.

» Download Datasheet


OWIS DT 130 Rotary Stage 

DT 130 Rotary Stage

The DT 130 rotary stage has a prestressed worm gear drive with a gear ratio of 180:1. Despite its compact dimensions, it can handle large loads in both axial and radial directions. The DT 130 has a large unobstructed opening of 56mm and is available with motor drive. 

» Download Datasheet


OWIS DV 65 Rotary Adjustment Stage 

DV 65 Rotary Adjustment Stage

The DV 65 rotary adjustment stage allows an unlimited rotation, that is not entirely backlash-free. The 37mm aperture allows the user to hold large optics using special adapters. Other adapter plates are available for mounting translation or measuring stages. The worm gear is not preloaded and its drive shaft can be uncoupled for fast and rough adjustment. The DV 65 is compatible with the SYS 65 rail system. 

» Download Datasheet


OWIS DV 85 Rotary Adjustment Stage 

DV 85 Rotary Adjustment Stage

The DV 85 rotary adjustment stage allows an unlimited rotation, that is not entirely backlash-free. The 53mm aperture allows the user to hold large optics using special adapters. Other adapter plates are available for mounting translation or measuring stages. The worm gear is not preloaded and its drive shaft can be uncoupled for fast and rough adjustment.

» Download Datasheet


Related Products
Datasheets
Brochures
Case Studies
Knowledge Base
Have a Question?

Why not use our convenient enquiry form?

> Click Here

Buy Online

This product can be ordered via the Pro-Lite on-line shop.

> Click Here

Need a measurement?

Contract measurement services are available from Pro-Lite Photometrics using this product

> Click Here