Pro Lite Technology

Opto-Mechanics - Optical Holders

This is the section for rotary mounts, reduction inserts, fibre optic adaptors, mounts for slack optics, mirror mounts, flip mirror holders, general optics holders, holders for cylinderical optics and a nano-positioning optics holder.

» Request 3D PDF or 3D CAD model for the item(s) of interest.


OWIS DOH 40 & DOH 65 Rotary Mounts 

DOH 40 & DOH 60 Rotary Mounts

The DOH 40 & 60 rotary mounts are designed for holding optics such as polarisers or delay plates. The lockable outer ring has a scale with 5° or 2° graduations (DOH 40 & 60, respectively). The DOH 40 can hold 25mm or 1" (25.4 mm) and the DOH 65 can hold 56mm optics. Both models can be mounted on pins with M6 threads and are compatible with the SYS 40 and SYS 65 rail systems respectively.  

» Download Datasheet


OWIS EINSR Inserts 

EINSR Reduction Inserts &
FASE 40 Fibre Adapters

The EINSR series reduction inserts are used for holding mounted optics (plates, cubes etc) and are supplied with internal threads for microscope objectives and C-mount camera objectives, or with a plain bore. Outside diameters range from 25 to 56mm. Also available are FASE 40 fibre optic adapters (FC & SMA).

» Download Datasheet


OWIS G Mounts for Slack Optics 

G Mounts for Slack Optics

The G-series holders take unmounted optics with diameters from 8 to 50mm (2") diameter. Certain models are available with a stepped ring that retains optics with metric as well as imperial diameters. The optic is held in place with a clamping ring.

» Download Datasheet


OWIS K 25 Small Mirror Mount 

K 25 Small Mirror Mount

The K 25 is a small, kinematic mirror mount for mirrors up to 1" diameter (or with 20 x 30mm rectangular mirrors for beam steering). Adjustment is via micrometers or fine adjustment screws with a 0.25mm pitch. The K 25 is designed for use with the SYS 40 rail system (together with the base plate FP-K 25-LL).

» Download Datasheet


OWIS K 50 Mirror Mount 

K 50 Mirror Mount

The K 50 is a kinematic mirror mount for front surface mirrors between 25 & 50mm diameter (1 to 2"). Adjustment is via micrometers or fine adjustment screws with a 0.25mm pitch. The K 50 is designed for use with the SYS 65 rail system.

» Download Datasheet


OWIS K 80 Mirror Mount 

K 80 Mirror Mount

The K 80 is a high-stability kinematic mirror mount for mirrors between 63.5mm (2.5") & 80mm diameter. Adjustment is via micrometers or fine adjustment screws. Motorised adjustment is optional. The K 80 is designed for use with the SYS 90 rail system in conjunction with the FP 70x70x15 base plate.

 

» Download Datasheet


OWIS K 100 Mirror Mount 

K 100 Mirror Mount

The K 100 directly holds mirrors of 4, 5 or 6" diameter with adjustment via micrometers or fine adjustment screws. Motorised adjustment is optional. The K 100 is designed for use with the SYS 90 rail system in conjunction with available base plates or slides.

» Download Datasheet


OWIS KSH 40 Flip Mirror Holder 

KSH 40 Flip Mirror Holder

The KSH 40 is a flip mirror holder for 1" optics with a swivel plate which flips the beam left or right through 45° with a repeatability better than 100μrad.  An adjustable plate is mounted on the swivel plate with a range of ± 1.1°. The KSH 40 is not suitable for transmitting optics. It is available with base plate or slide compatible with the SYS 40 rail system.

» Download Datasheet


OWIS KSH 40 Flip Mirror Holder 

KSHM 40 Motorised Flip Mirror Holder

The KSHM 40 is a motorised version of the KSH 40 flip mirror holder for 1" optics. It has a swivel plate which flips the beam left or right through 45° with a repeatability better than 100μrad.  An adjustable plate is mounted on the swivel plate with a range of ± 1.1°. The KSHM 40 is not suitable for transmitting optics. It is available with base plate or slide compatible with the SYS 40 rail system

» Download Datasheet


OWIS KSH 65 Flip Mirror Holder 

KSH 65 Flip Mirror Holder

The KSH 65 is a flip mirror holder for 1.5" optics with a swivel plate which flips the beam left or right through 45° with a repeatability better than 100μrad.  An adjustable plate is mounted on the swivel plate with a range of ± 0.6°. The KSH 65 is suitable for transmitting optics. It is available with base plate or slide compatible with the SYS 65 rail system.

» Download Datasheet


OWIS KSH 65 Flip Mirror Holder 

KSHM 65 Motorised Flip Mirror Holder

The KSHM 65 is a motorised version of the KSH 65 flip mirror holder for 1.5" optics. It has a swivel plate which flips the beam left or right through 45° with a repeatability better than 100μrad.  An adjustable plate is mounted on the swivel plate with a range of ± 0.6°. The KSHM 65 is suitable for transmitting optics. It is available with base plate or slide compatible with the SYS 65 rail system.

» Download Datasheet


OWIS KSH 90 Flip Mirror Holder 

KSH 90 Flip Mirror Holder

The KSH 90 is a flip mirror holder for 2.0" optics with a swivel plate which flips the beam left or right through 45° with a repeatability better than 100μrad.  An adjustable plate is mounted on the swivel plate with a range of ± 0.5°. The KSH 90 is suitable for transmitting optics. It is available with base plate or slide compatible with the SYS 90 rail system.

» Download Datasheet


OWIS KSH 90 Flip Mirror Holder 

KSHM 90 Motorised Flip Mirror Holder

The KSHM 90 is a motorised version of the KSH 90 flip mirror holder for 2.0" optics. It has a swivel plate which flips the beam left or right through 45° with a repeatability better than 100μrad.  An adjustable plate is mounted on the swivel plate with a range of ± 0.5°. The KSHM 90 is suitable for transmitting optics. It is available with base plate or slide compatible with the SYS 90 rail system.

» Download Datasheet


OWIS NOP 40 Nano Positioner 

NOP 40 Nano Positioner

The NOP 40 is a nano optical positioner with optional measuring system designed for use with the SYS 40 rail system. At its core is the nano linear stage PT 30-5 which moves the mounted optic holders over a 4.8mm travel along the optical (z) axis in 300nm steps. A piezo ceramic serves as actuator which enables fine adjustment of optics.

» Download Datasheet


OWIS OH 40-D Optics Holder 

OH 40-D Holder for Mounted Optics

OH 40-D series holders accept mounted optics of 25, 30 & 35mm diameter and come with tapped holes for mounting on RT 40 slides for use with the SYS 40 rail system. The 25 & 30mm holders can also be mounted on pins. The internal mounting diameter corresponds to the external diameter of our optics mounts (plates, inserts & adjustable inserts).

» Download Datasheet


OWIS OH 65-D Optics Holder 

OH 65-D Holder for Mounted Optics

OH 65-D series holders accept mounted optics of 25, 35, 45 & 56mm diameter and come with tapped holes for mounting on RT 65 slides for use with the SYS 65 rail system. The 25, 35 & 45mm holders can also be mounted on pins. The internal mounting diameter corresponds to the external diameter of our optics mounts (plates, inserts & adjustable inserts).

» Download Datasheet


OWIS OHU 40D Optics Holder 

OHU 40-D & 65-D Unmounted Optics Holders

OHU 40-D & 65-D holders allow unmounted optics, inserts and adjustable inserts to be located in the beam path. The internal mounting diameters (8.1 to 50mm) corresponds to the external diameter of our optics mounts. The holders have tapped holes for mounting on RT 40 & 65 slides for use with the SYS 40 & 65 rail systems respectively. An additional central M6 tapped hole allows mounting on pins.

» Download Datasheet


OWIS OHU 90D Optics Holder 

OHU 90-D Unmounted Optics Holder

OHU 90-D holders allow unmounted optics, inserts and adjustable inserts to be located in the beam path. The internal mounting diameters of 75mm, 100mm, 3" or 4" corresponds to the external diameter of our optics mounts. The holders have tapped holes for mounting on RT 90 slides for use with the SYS 90 rail systems. An additional central M6 tapped hole allows mounting on pins.

» Download Datasheet


OWIS OHZ 40 Cylinderical Lens Holder 

OHZ 45 & OHZ 65 Cylinderical Lens Holders

The OHZ 45 is a holder for 20 x 20mm cylinderical lenses for use with the SYS 40 rail system mounting plates and cubes. It also has an M6 tapped hole for mounting on pins. The OHZ 65 are holders for 20 x 40mm, 40 x 40mm or 50 x 50mm cylinderical lenses for use with the SYS 65 rail system mounting plates and cubes.

» Download Datasheet


Related Products
Datasheets
Brochures
Case Studies
Knowledge Base
Have a Question?

Why not use our convenient enquiry form?

> Click Here

Buy Online

This product can be ordered via the Pro-Lite on-line shop.

> Click Here

Need a measurement?

Contract measurement services are available from Pro-Lite Photometrics using this product

> Click Here